CUSTOMISABLE

The Pebble Floating Bed Frame

Walnut upholstered bed with two lift-off headboard cushions

$4,688.00

Pay over time with Klarna

Wood Type — Solid American Walnut

Color — black

$4,688.00

Free shipping in the contiguous U.S. -- Production Time: 6-10 weeks

Hardwax Oil Finish
Refinishable
No Veneer

Two cushions make up the headboard, one for each side of the bed. They lift off, and their covers unzip for cleaning.

Product Details

Two headboard cushions, one per side
Covers unzip for cleaning
Adjustable lumbar panel behind the cushions
Legs set in for a floating look
6.3 in (16 cm) clear under the frame
Four colors: beige, white, green, black

The Pebble is a walnut upholstered bed whose headboard is two separate cushions, one for each sleeper. Behind them, a lumbar panel tilts out when you want to sit up.

A headboard in two halves

Each side of the bed gets its own cushion. Both sit on a padded back framed in walnut.

The cushions are filled with white goose down blended with fiber fill. The back panel behind them is padded with high-resilience foam.

A lumbar panel sits behind the cushions and tilts out. Tilt it for a more upright seat, or leave it back for more recline.

Cushions off, covers off

Lift a cushion off the frame, and its cover unzips for cleaning. The four colors are beige, white, green and black.

A walnut floating bed, with room underneath

From the side, it reads as a walnut floating bed, because the legs sit back under the frame. There's 6.3 in (16 cm) of clear space underneath. Anti-slip pads for the legs come with the bed.

Rails and legs have rounded corners. The bed leaves room for a baseboard, so it can sit against the wall.

Slats and the mattress

The slats are solid pine, left unfinished. Your mattress sits on them directly, so you don't need a box spring. It sits 1.8 in (4.5 cm) down inside side rails 5.5 in (14 cm) tall.

Walnut under hardwax oil

The frame is solid American black walnut, and every wooden part is solid wood. We use Appalachian FAS-grade walnut with mortise-and-tenon joinery, kiln-dried to 8 to 10% moisture.

The finish is hardwax oil. A slight smell on unpacking is normal; keep the room aired. Grain and color vary from board to board, and that's not a defect.

Sizes, and one figure we don't have

Both sizes fit standard US mattresses: Queen 60 × 80 in and King 76 × 80 in. The King measures 80.1 × 86.8 in (203.5 × 220.5 cm) overall and 43.3 in (110 cm) tall.

We don't have a confirmed overall size for the Queen yet. If your room is tight, ask us before you order.

If you'd rather have an all-wood headboard, look at the Heritage.

Ordering the Pebble

We build each Pebble to order. Production takes 6 to 10 weeks, and delivery is about 10 to 18 weeks after you order.

Standard shipping is free across the contiguous United States, excluding remote areas. You have 90 days after receiving your order to request a return. Custom dimensions, custom finishes and special-order modifications are not eligible for return.

To see every design side by side, browse our walnut beds.

Sizes

Queen, King

Mattress fit

Queen fits a standard US Queen mattress (60 × 80 in); King fits a standard US King mattress (76 × 80 in)

Mattress area

Queen 60.6" × 80.5" (154 × 204.5 cm); King 76.6" × 80.5" (194.5 × 204.5 cm)

Overall, King

80.1" W × 86.8" L (203.5 × 220.5 cm)

Height, King

43.3" (110 cm) with cushions; wooden headboard 37.6" (95.5 cm)

Cushions

23.6" (60 cm) tall

Side rails

5.5" (14 cm) tall; mattress sits 1.8" (4.5 cm) inside

Under-bed clearance

6.3" (16 cm)

Measurements

Hand-measured; allow 1 to 2 cm

Material

Solid American black walnut frame; every wooden part is solid wood

Wood grade

Appalachian FAS-grade walnut

Slats

Solid pine, unfinished

Lumber

Kiln-dried to 8 to 10% moisture content

Finish

Hardwax oil

Care

Dust with a soft dry cloth; refresh with a hardwax-oil maintenance product

Headboard

Upholstered headboard cushions, two, lift-off, with zip-off covers

Cushion fill

White goose down blended with fiber fill; high-resilience foam back panel

Lumbar panel

Tilts out for a more upright or reclined lean

Colors

Beige, white, green, black

Joinery

Mortise-and-tenon joinery

Legs

Set in under the frame; anti-slip pads included

Box spring

Not needed; the mattress sits directly on the slats

Production

Made to order; production 6 to 10 weeks; delivered about 10 to 18 weeks after order

Returns

90-day return policy on eligible pieces

Dust with a soft, dry cloth weekly
Wipe spills within 30 seconds — water-resistant, not waterproof
Use coasters, trivets, and a runner for hot dishware
Avoid direct sun and HVAC vents; keep room humidity at 40–60%
Buff lightly with a dry cloth every few months to redistribute surface wax
Refresh with a hardwax-oil maintenance product every 1 to 3 years

For a full walkthrough, see our walnut furniture care guide.

Can I take the cushions off?

Yes. They lift off, and the covers unzip for cleaning.

What's inside the cushions?

White goose down blended with fiber fill. The back panel behind them is padded with high-resilience foam.

What colors are there?

Beige, white, green and black, all on the same walnut frame.

Do I need a box spring?

No. The mattress sits directly on the solid pine slats.

How big is the King?

The King is 80.1 × 86.8 in (203.5 × 220.5 cm) overall and 43.3 in (110 cm) tall. It fits a standard US King mattress (76 × 80 in).

Confidence, Crafted In Every Piece

Designed for lasting comfort and made with considered materials, each Walnutry piece is supported from selection to delivery with care that feels as refined as the furniture itself.

The Pebble Floating Bed Frame

Product Details